Green Design at the Ford Rouge Complex

Part 2 of my trip report on the Ford Rouge Complex in Dearborn, MI ... [Part 1 gives my reactions to the tour inside the Dearborn Assembly Plant]



Vertical Manufacturing—No More
Another aspect of the visit to the Rouge Complex is the understanding it gives of the complexity of the original enterprise. The short movie prepared by the tour company, which is not affiliated with Ford, emphasizes Henry Ford’s experiment in vertical manufacturing. The complex had its own steel mill, plate glass facility, and foundry, owned sources for the rubber that was used, and had its own deep-water port to bring in needed materials. However, the present day complex obtains its parts from many different suppliers, some of which are still brought in at the Rouge port. The steel mill still supplies steel for the stamping plant, but it is not owned by Ford. The tour guide told me that Ford would only buy steel from the on-site company as long as the price was competitive.

Green Building, Brown Product?
A major focus of the factory tour was the “green design” features that had been incorporated in the new assembly building. This included a green roof, featuring layers of material topped by a variety of sedum, designed to lower temperatures in the building and capture some of the rainwater that otherwise would run off. In addition, skylights on the roof were added to increase natural light in the building and lower lighting costs. Rainwater recapture systems, swales and ponds were used for on-site stormwater management (although the guide kept calling it a “storm management” system!).

Wildlife habitat was enhanced with natural plantings, and fruit trees (crabapples and one other that I can’t recall) were planted to provide food for wildlife. Ford even has a beekeeper who manages the bee hive within the planted area, placed to ensure pollination of the trees. Additional green features included the permeable pavement used for employee parking lots, which lessens rainwater runoff, and a system to recapture paint fumes (VOCs) as a source of hydrogen for a fuel cell to produce electricity for the painting facility.

The irony to me, of course, was that the company had built a green building within which it was assembling Ford 150 trucks, not exactly know for their environmentally friendly profile! The other sad part for me was that, despite the hopeful and forward-looking taped message from Bill Ford, the news about tough times at Ford Motor Co. made me fear that all of this effort to be innovative and green would have been for naught.

Stephanie, Webmaster
StillMadeinUSA.com

Ford Motor Co.’s Dearborn Assembly Plant

This summer, rather than head to the beach or something else predictable, our family took a “manufacturing” vacation! I figured I’d better get the kids to some facilities before American manufacturing goes the way of the pterodactyl. We hit several interesting spots, so I decided to write a few installments on “the blog” to share with everyone, and maybe make you want to go check out your local manufacturing facilities.



Dearborn Truck Assembly Plant (Part 1)

As a Ford Taurus owner, I wanted to make my pilgrimage to Dearborn, MI, world headquarters of Ford Motor Co. and site of the renovated Dearborn Assembly Plant (the Rouge Factory) and Henry Ford Museum and Greenfield Village. I was most excited about the opportunity to see inside the truck assembly plant.

I really enjoyed the Ford Rouge Factory Tour, although it wasn’t as complete as I had hoped. Apparently the tour was changed some years ago because of safety concerns, and it no longer covers the welding or painting parts of the work. So, all we were able to see was the final assembly of the F150 trucks. (Another disappointment was that I did not see the Diego Rivera murals—I had thought they were part of the tour, but apparently they are at the Detroit Institute of Arts.)

The new Dearborn Assembly Plant was impressive, with lots of space and natural light. The facility was very clean, and not as noisy as I had expected. The workers did not seem rushed as they did their work on the passing vehicles. In fact, they seemed almost leisurely as they stepped on and off the moving line. When I commented on that to one of the guides, he smiled and said “yes, but remember they only have 43 seconds [to work on each vehicle as it passes by].”

I was also surprised to see how much of the work was still done by hand, by humans. We did see robots positioning the front windshield onto the frames, and there was a noisy and impressive point where the truck cab and bed came together. But, in general, we saw the workers putting on interior components of doors, pressing on rubber seals, and wiring up lights.

When 11:30 a.m. came, the line stopped and workers began to leave their stations for lunch. I noticed that each finished up the vehicle he/she was working on, rather than bolting for the door. I also noticed that a few of the workers stayed at their stations, opening lunch bags they had brought from home. I wondered if this was a way of being frugal, and whether it would make me lonely not to sit down to lunch with my coworkers.


The workers I watched were much more diverse than my stereotype of a UAW member; many were women, and many were minorities. Apparently the power tools, which were pulled down for use, were light enough that they were easily handled by the women. I also noticed that the workers were young, or at most middle-aged. I wondered it the age demographic was a result of the buy-outs and early retirement packages that Ford has been offering, or perhaps just a reality that work of this type (which requires one to stand, walk, and bend all day) takes its toll on a body after years.

Despite the good working environment, I thought I would be quickly bored by the repetitive nature of the job and the inability to “chat” with coworkers because of the noise.

Each worker or team had a work station with orderly stacked bins of parts needed for their part of the assembly. I read that these stations were supposed to have a 2-hour supply of parts. I assume this is part of the “Lean Manufacturing” ethic, but it seemed like it would have been more efficient to have a day’s worth. Watching the long assembly line, and the extremely large number of small parts involved, gave me new appreciation for the complexity of the relationship between assembly and parts suppliers. If any single part were to run out, the entire operation would have to shut down. Talk about pressure!

The end of the assembly process involved filling the vehicles with fluids, and testing them in various ways (e.g., on a dynamometer). What an interesting idea—that such a complicated piece of machinery could be put together by many hands, in many steps, and the final test that all worked is whether or not the truck starts and drives as intended!

Stephanie, Webmaster
StillMadeinUSA.com